156 lines
7.9 KiB
Systemverilog
156 lines
7.9 KiB
Systemverilog
// program2_tb
|
|
// testbench for programmable message decryption (Program #2)
|
|
// CSE141L
|
|
// runs program 2 (decrypt a message)
|
|
module program2_tb () ;
|
|
// DUT interface -- four one-bit wires, three to DUT, one from
|
|
bit clk , // advances simulation step-by-step
|
|
init = 1'b1 , // init (reset) command to DUT
|
|
start = 1'b1 ; // req (start program) command to DUT
|
|
wire done ; // done flag returned by DUT
|
|
// test bench parameters
|
|
bit [3:0] pre_length ; // space char. bytes before first char. in message
|
|
bit [7:0] message1[54] , // original raw message, in binary
|
|
msg_padded1[64], // original message, plus pre- and post-padding w/ ASCII spaces
|
|
msg_crypto1[64]; // encrypted message according to the DUT
|
|
bit [6:0] lfsr_ptrn , // chosen one of 9 maximal length 7-tap shift reg. ptrns
|
|
LFSR_ptrn[9] , // the 9 candidate maximal-length 7-bit LFSR tap ptrns
|
|
lfsr1[64] , // states of program 1 encrypting LFSR
|
|
LFSR_init ; // one of 127 possible NONZERO starting states
|
|
int score ; // count of correct encyrpted characters
|
|
// our original American Standard Code for Information Interchange message follows
|
|
// note in practice your design should be able to handle ANY ASCII string that is
|
|
// restricted to characters between space (0x20) and script f (0x9f) and shorter than
|
|
// 55 characters in length
|
|
string str1 = "Mr. Watson, come here. I want to see you."; // sample program 1 input
|
|
// string str1 = " Knowledge comes, but wisdom lingers. "; // alternative inputs
|
|
// string str1 = " 01234546789abcdefghijklmnopqrstuvwxyz. "; // (make up your own,
|
|
// string str1 = " f A joke is a very serious thing."; // as well)
|
|
// string str1 = " Ajok "; //
|
|
// string str1 = "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@";
|
|
// string str1 = " Knowledge comes, but wisdom lingers. "; //
|
|
|
|
// displayed encrypted string will go here:
|
|
string str_enc1[64]; // program 1 desired output will go here
|
|
int strlen; // incoming string length
|
|
int pt_no; // select LFSR pattern, value 0 through 8
|
|
int file_no; // write to file
|
|
// the 8 possible maximal-length feedback tap patterns from which to choose
|
|
assign LFSR_ptrn[0] = 7'h60; // 110_0000
|
|
assign LFSR_ptrn[1] = 7'h48;
|
|
assign LFSR_ptrn[2] = 7'h78;
|
|
assign LFSR_ptrn[3] = 7'h72;
|
|
assign LFSR_ptrn[4] = 7'h6A;
|
|
assign LFSR_ptrn[5] = 7'h69;
|
|
assign LFSR_ptrn[6] = 7'h5C;
|
|
assign LFSR_ptrn[7] = 7'h7E;
|
|
assign LFSR_ptrn[8] = 7'h7B;
|
|
always_comb begin
|
|
pt_no = 0; //$random>>22; // or pick a specific one
|
|
if(pt_no>8) pt_no[3] = 0; // restrict to 0 through 8 (our legal patterns)
|
|
lfsr_ptrn = LFSR_ptrn[pt_no]; // engage the selected pattern
|
|
end
|
|
// now select a starting LFSR state -- any nonzero value will do
|
|
always_comb begin
|
|
LFSR_init = 'b1;//$random>>2; // or set a value, such as 7'b1, for debug
|
|
if(!LFSR_init) LFSR_init = 7'b1; // prevents illegal starting state = 7'b0;
|
|
end
|
|
|
|
// set preamble lengths for the four program runs (always > 9 but < 16)
|
|
always_comb begin
|
|
pre_length = 10;//$random>>10 ; // program 1 run
|
|
if(pre_length < 10) pre_length = 10; // prevents pre_length < 10
|
|
else if(pre_length > 26) pre_length = 26;
|
|
end
|
|
|
|
// ***** instantiate your own top level design here *****
|
|
top_level dut(
|
|
.clk (clk ), // input: use your own port names, if different
|
|
.init (init ), // input: some prefer to call this ".reset"
|
|
.req (start), // input: launch program
|
|
.ack (done ) // output: "program run complete"
|
|
);
|
|
|
|
initial begin
|
|
//***** pre-load your instruction ROM here or inside itself *****
|
|
// $readmemb("encoder.bin", dut.instr_rom.rom);
|
|
// you may also pre-load desired constants, etc. into
|
|
// your data_mem here -- the upper addresses are reserved for your use
|
|
// dut.data_mem.DM[128]=8'hfe; //whatever constants you want
|
|
// to display to console, change this line to file_no = 'b1;
|
|
file_no = 'b1;
|
|
// file_no = $fopen("msg_decoder_out.txt"); // create your output file
|
|
#0ns strlen = str1.len; // length of string 1 (# characters between " ")
|
|
if(strlen>52) strlen = 52; // clip message at 52 characters
|
|
// program 1 -- precompute encrypted message
|
|
lfsr1[0] = LFSR_init; // any nonzero value (zero may be helpful for debug)
|
|
$fdisplay(file_no,"run encryption program; original message = ");
|
|
$fdisplay(file_no,"%s",str1); // print original message in transcript window
|
|
$fdisplay(file_no,"LFSR_ptrn = 0x%h, LFSR_init = 0x%h",lfsr_ptrn,LFSR_init);
|
|
$fdisplay(file_no,"pt_no = %d",pt_no);
|
|
|
|
// will subtract 0x20 from each preamble and message character
|
|
for(int j=0; j<64; j++) // pre-fill message_padded with ASCII space characters
|
|
msg_padded1[j] = 8'h20; //
|
|
for(int l=0; l<strlen; l++) // overwrite up to 49 of these spaces w/ message itself
|
|
msg_padded1[pre_length+l] = str1[l]; //
|
|
// compute the LFSR sequence
|
|
for (int ii=0;ii<63;ii++)
|
|
lfsr1[ii+1] = {(lfsr1[ii][5:0]),(^(lfsr1[ii]&lfsr_ptrn))};
|
|
|
|
// encrypt the message charater-by-character, then prepend the parity
|
|
// testbench will change on falling clocks to avoid race conditions at rising clocks
|
|
for (int i=0; i<64; i++) begin
|
|
msg_crypto1[i] = (msg_padded1[i] ^ lfsr1[i]);
|
|
msg_crypto1[i][7] = ^msg_crypto1[i][6:0]; // prepend parity bit into MSB
|
|
$fdisplay(file_no,"i=%d, msg_pad=0x%h, lfsr=%b msg_crypt w/ parity = 0x%h",
|
|
i,msg_padded1[i],lfsr1[i],msg_crypto1[i]);
|
|
// for display purposes only, add 8'h20 to avoid nonprintable characters (<8'h20)
|
|
str_enc1[i] = string'(msg_crypto1[i][6:0]+8'h20);
|
|
end
|
|
$fdisplay(file_no,"encrypted string = ");
|
|
for(int jj=0; jj<64; jj++)
|
|
$fwrite(file_no,"%s",(str_enc1[jj]));
|
|
$fdisplay(file_no,"\n");
|
|
|
|
// run encryption program first to know what to decrypt
|
|
// ***** load operands into your data memory *****
|
|
// ***** use your instance name for data memory and its internal core *****
|
|
// for(int m=0; m<61; m++)
|
|
// dut.DM.core[m] = 8'h20; // pad memory w/ ASCII space characters
|
|
// for(int m=0; m<strlen; m++)
|
|
// dut.DM.core[m] = str1[m]; // overwrite/copy original string into device's data memory[0:strlen-1]
|
|
// dut.DM.core[61] = pre_length; // number of bytes preceding message
|
|
// dut.DM.core[62] = lfsr_ptrn; // LFSR feedback tap positions (9 possible ptrns)
|
|
// dut.DM.core[63] = LFSR_init; // LFSR starting state (nonzero)
|
|
for(int n=0; n<64; n++) // load encrypted message into data memory
|
|
dut.DM.core[n+64] = msg_crypto1[n];
|
|
#20ns init = 1'b0; // suggestion: reset = 1 forces your program counter to 0
|
|
#10ns start = 1'b0; // request/start = 1 holds your program counter
|
|
#60ns; // wait for 6 clock cycles of nominal 10ns each
|
|
wait(done); // wait for DUT's ack/done flag to go high
|
|
#10ns $fdisplay(file_no,"");
|
|
$fdisplay(file_no,"program 2:");
|
|
// ***** reads your results and compares to test bench
|
|
// ***** use your instance name for data memory and its internal core *****
|
|
for(int n=0; n<64; n++) begin
|
|
if(msg_padded1[n]==dut.DM.core[n]) begin
|
|
$fdisplay(file_no,"%d bench msg: %s %h dut msg: %h",
|
|
n, msg_padded1[n], msg_padded1[n], dut.DM.core[n]);
|
|
score++;
|
|
end
|
|
else
|
|
$fdisplay(file_no,"%d bench msg: %s %h dut msg: %h OOPS!",
|
|
n, msg_padded1[n], msg_padded1[n], dut.DM.core[n]);
|
|
end
|
|
$fdisplay(file_no,"score = %d/64",score);
|
|
#20ns $fclose(file_no);
|
|
#20ns $stop;
|
|
end
|
|
|
|
always begin // continuous loop
|
|
#5ns clk = 1; // clock tick
|
|
#5ns clk = 0; // clock tock
|
|
end
|
|
|
|
endmodule |