cse141L-project/RTL/program2_tb.sv

// program2_tb
// testbench for programmable message decryption (Program #2)
// CSE141L  
// runs program 2 (decrypt a message)
module program2_tb ();
	// DUT interface -- four one-bit wires, three to DUT, one from
	bit clk; // advances simulation step-by-step
	bit init  = 1'b1; // init (reset) command to DUT
	bit start = 1'b1; // req (start program) command to DUT
	wire done; // done flag returned by DUT

	// test bench parameters
	bit [3:0] pre_length; // space char. bytes before first char. in message  
	bit [7:0] message1[54]; // original raw message, in binary
	bit [7:0] msg_padded1[64]; // original message, plus pre- and post-padding w/ ASCII spaces
	bit [7:0] msg_crypto1[64]; // encrypted message according to the DUT
	bit [6:0] lfsr_ptrn; // chosen one of 9 maximal length 7-tap shift reg. ptrns
	bit [6:0] LFSR_ptrn[9]; // the 9 candidate maximal-length 7-bit LFSR tap ptrns
	bit [6:0] lfsr1[64]; // states of program 1 encrypting LFSR
	bit [6:0] LFSR_init; // one of 127 possible NONZERO starting states
	int score; // count of correct encyrpted characters

	// our original American Standard Code for Information Interchange message follows
	// note in practice your design should be able to handle ANY ASCII string that is
	//  restricted to characters between space (0x20) and script f (0x9f) and shorter than 
	//  55 characters in length
	string str1 = "Knowledge comes, but wisdom lingers"; // sample program 1 input

	// displayed encrypted string will go here:
	string str_enc1[64]; // program 1 desired output will go here
	int strlen; // incoming string length 
	int pt_no; // select LFSR pattern, value 0 through 8
	int file_no; // write to file
	// the 8 possible maximal-length feedback tap patterns from which to choose
	assign LFSR_ptrn[0] = 7'h60;	   // 110_0000  
	assign LFSR_ptrn[1] = 7'h48;
	assign LFSR_ptrn[2] = 7'h78;
	assign LFSR_ptrn[3] = 7'h72;
	assign LFSR_ptrn[4] = 7'h6A;
	assign LFSR_ptrn[5] = 7'h69;
	assign LFSR_ptrn[6] = 7'h5C;
	assign LFSR_ptrn[7] = 7'h7E;
	assign LFSR_ptrn[8] = 7'h7B;

	always_comb begin
		pt_no = $urandom_range(0, 8);
		if(pt_no>8) pt_no[3] = 0; // restrict pt_no to 0 through 8
		lfsr_ptrn = LFSR_ptrn[pt_no]; // look up and engage the selected pattern; to data_mem[62]
	end

	// now select a starting LFSR state -- any nonzero value will do
	always_comb begin
		LFSR_init = $urandom;//$random>>2;          // or set a value, such as 7'b1, for debug
		if(!LFSR_init) LFSR_init = 7'b1; // prevents illegal starting state = 7'b0; 
	end

	// set preamble lengths for the four program runs (always > 9 but < 16)
	always_comb begin
		pre_length = $urandom_range(10, 26);//$random>>10 ;             // program 1 run
		if(pre_length < 10) pre_length = 10;        // prevents pre_length < 10
		else if(pre_length > 26) pre_length = 26; 
	end

	// ***** instantiate your own top level design here *****
	top_level #(.machine_code_file("machine_code_2.txt")) dut(
		.clk(clk), // input: use your own port names, if different
		.init(init), // input: some prefer to call this ".reset"
		.req(start), // input: launch program
		.ack(done) // output: "program run complete"
	);

  	initial begin
		file_no = 'b1; 
		#0ns strlen = str1.len; // length of string 1 (# characters between " ")
		if(strlen>52) strlen = 52; // clip message at 52 characters
		// program 1 -- precompute encrypted message
		lfsr1[0]     = LFSR_init;           // any nonzero value (zero may be helpful for debug)
		$fdisplay(file_no,"run encryption program; original message = ");
		$fdisplay(file_no,"%s",str1);       // print original message in transcript window
		$fdisplay(file_no,"LFSR_ptrn = 0x%h, LFSR_init = 0x%h",lfsr_ptrn,LFSR_init);
		$fdisplay(file_no,"pt_no = %d",pt_no);

		// will subtract 0x20 from each preamble and message character
		for(int j=0; j<64; j++)            // pre-fill message_padded with ASCII space characters
			msg_padded1[j] = 8'h20;          //   
		for(int l=0; l<strlen; l++)        // overwrite up to 49 of these spaces w/ message itself
			msg_padded1[pre_length+l] = str1[l];  // 
		// compute the LFSR sequence
		for (int ii=0;ii<63;ii++)
			lfsr1[ii+1] = {(lfsr1[ii][5:0]),(^(lfsr1[ii]&lfsr_ptrn))};

		// encrypt the message charater-by-character, then prepend the parity
		//  testbench will change on falling clocks to avoid race conditions at rising clocks
		for (int i=0; i<64; i++) begin
			msg_crypto1[i]        = (msg_padded1[i] ^ lfsr1[i]);
			msg_crypto1[i][7]     = ^msg_crypto1[i][6:0];       // prepend parity bit into MSB
			$fdisplay(file_no,"i=%d, msg_pad=0x%h, lfsr=%b msg_crypt w/ parity = 0x%h", i,msg_padded1[i],lfsr1[i],msg_crypto1[i]);
			// for display purposes only, add 8'h20 to avoid nonprintable characters (<8'h20)
      		str_enc1[i]           = string'(msg_crypto1[i][6:0]+8'h20);
    	end
		$fdisplay(file_no,"encrypted string =  "); 
		for(int jj=0; jj<64; jj++)
			$fwrite(file_no,"%s",(str_enc1[jj]));
		$fdisplay(file_no,"\n");

		// run encryption program first to know what to decrypt
		// ***** load operands into your data memory *****
		// ***** use your instance name for data memory and its internal core *****
		//    for(int m=0; m<61; m++)
		//	  dut.DM.core[m] = 8'h20;         // pad memory w/ ASCII space characters
		//    for(int m=0; m<strlen; m++)
		//      dut.DM.core[m] = str1[m];       // overwrite/copy original string into device's data memory[0:strlen-1]
		//    dut.DM.core[61] = pre_length;     // number of bytes preceding message
		//    dut.DM.core[62] = lfsr_ptrn;      // LFSR feedback tap positions (9 possible ptrns)
		//    dut.DM.core[63] = LFSR_init;      // LFSR starting state (nonzero)
		for(int n=0; n<64; n++) 			// load encrypted message into data memory
			dut.DM.core[n+64] = msg_crypto1[n];
		#20ns init  = 1'b0;				  // suggestion: reset = 1 forces your program counter to 0
		#10ns start = 1'b0; 			  //   request/start = 1 holds your program counter 
		#60ns;                            // wait for 6 clock cycles of nominal 10ns each
		wait(done);                       // wait for DUT's ack/done flag to go high

		#10ns $fdisplay(file_no,"");
		$fdisplay(file_no,"program 2:");

		// ***** reads your results and compares to test bench
		// ***** use your instance name for data memory and its internal core *****
		for(int n=0; n<64; n++)	begin
			if(msg_padded1[n]==dut.DM.core[n])	begin
				$fdisplay(file_no,"%d bench msg: %s %h dut msg: %h",
				n, msg_padded1[n], msg_padded1[n], dut.DM.core[n]);
				score++;
			end
			else begin
				$fdisplay(file_no,"%d bench msg: %s %h dut msg: %h  OOPS!",
				n, msg_padded1[n], msg_padded1[n], dut.DM.core[n]);
			end
		end

		$fdisplay(file_no,"score = %d/64",score);
		#20ns $fclose(file_no);
		#20ns $stop;
  	end

	always begin     // continuous loop
		#5ns clk = 1;  // clock tick
		#5ns clk = 0;  // clock tock
	end

endmodule